FOXTEAM UAV CLAN

a Virtual Robotix Network Team

Featured Blog Posts (7)

V2 proyect

 Building and testing platform for transport and recovery sensors in sensitive area, remember, this is only a game!

 

This project was born from the need to provide my aircraft with a RF system

transmission autonomous to identify their location in emergency condition,

this condition must be remote and connected only failure all the systems on…

Continue

Added by Da Col Alessandro on February 14, 2012 at 1:00am — 6 Comments

ArduCam OSD by Sandro my great friend from brasil

The project is about controlling digital cameras remotely using USB PTP commands and adding telemetry and camera feedback data to the video signal coming from the controlled camera. The main purpose is to be applied on UAV projects, otherwise, it can be used on every kind of camera remote controlling and shooting.

The hardware used here allows some nice extrapolations of the project. Let's say you could use the USB Host to attach another kind of peripheral like a…

Continue

Added by Roberto Navoni on May 9, 2011 at 11:17am — 1 Comment

Multipilot 32 + VR IMU 1.0 First Times in The Sky was a windy Day early revision of arducopter 2.0 onboard :)





In this video you can see the first flight doing with Virtual Robotix IMU , in the test i only check the sensor board , Gyro and Accelerometer , in the next test i check navy and input output functionality.

 

Today was a windy day , after solve with Randy a problem on the YAW control .. i doing the preflight check , all seem to work fine and so decide to going in the sky.

 

I'm using the same PID used with oilpan , there're not…

Continue

Added by Roberto Navoni on May 7, 2011 at 12:00am — 4 Comments

ACM at the AVC (Jason Diydrones)

Image: 1st Run

 

AVC was great fun and even though I went for broke on the last run and lost my copter, it was well worth it. I learned a lot about copter navigation. The latest code includes all of the updates, which is being tested now by Jack Dunkle.

 

Run 1 went really well. In turn 1 you…

Continue

Added by Roberto Navoni on April 27, 2011 at 9:50am — No Comments

ARM based quadcopter

Here is a picture of my quadcopter in its current setup.

Hi,

I just signed up for an account on this page. Roberto has asked me to write a bit about my quadcopter project and perhaps help out with some of the ChibiOS related aspects of his MP32 project. I have written about this on DIYDrones in the past, but I will try and highlight some of the main aspects here.…

Continue

Added by Marko Kleine Berkenbusch on March 21, 2011 at 11:30pm — 13 Comments

HexaFox ArduCopter Early version ... first flight

Continue

Added by Roberto Navoni on June 22, 2010 at 9:37pm — No Comments

ArduPilot Flight Simulator and Google Earth from DiyDrones Network

A photo of successful flight as seen in Google Earth and X-plane:…

Continue

Added by Roberto Navoni on June 13, 2010 at 9:00pm — No Comments

Events

© 2018   Created by Roberto Navoni.   Powered by

Badges  |  Report an Issue  |  Terms of Service