FOXTEAM UAV CLAN

a Virtual Robotix Network Team

August 2013 Blog Posts (9)

New smart product from HobbyKing - Telemetry Radio Cases

Great Product if you use 3DR type telemetry radio modules

http://www.hobbyking.com/hobbyking/s...dProduct=45363



Buddy price code:…

Continue

Added by Oyvind Amundsen on August 31, 2013 at 8:24am — No Comments

VR GIMBAL 2.0 : 3 Axis 32bit Direct Drive Gimbal Hardware is available ,last video on VR Copter Landing Gear , the order is reopen :)

VR Copter Landing Gear now we have a new Option for our new frame. (raw video from VR LAB)…

Continue

Added by Roberto Navoni on August 30, 2013 at 11:00pm — 5 Comments

First VRBRAIN female pilot

Straight from Marco Robustini's UAV piloting school here is the first video of his new pupil: Valentina Russo.

Must say she earned Marco's bravery in flying such a big Quad...

She is Flying VRBRAIN of course on Marco's custom quad.

Bravi Valentina and Marco!

Added by emile on August 29, 2013 at 1:00pm — No Comments

Debug VRbrain con ARM-USB-OCD-H by Olimex

Cercherò di spiegare come sono riuscito a configurare il debugger Jtag.

I will try to explain how I managed to configure the JTAG debugger.

 

Youtube video :…

Continue

Added by Enrico Viale on August 28, 2013 at 8:00pm — 3 Comments

Black Ops Drone 2.0 the first VR ready to fly drone is coming .... one day with VR Lab Developer

In the video we present the development process of new technologies within the VR Lab.

The first step is to evaluate different potential ideas at this stage and a lot of importance 'given to the design,…

Continue

Added by Roberto Navoni on August 27, 2013 at 9:00pm — 1 Comment

My new CTX4 V2 frame

Inspired by Robertos "open top" frame I have modified my CTX4 frame design to get open top and top mounted LiPo CTX4 V2

 

Some Pictures created using SketchUp

The frame uses 16mm carbon tubes and tube clamps from flyduino.net…

Continue

Added by Oyvind Amundsen on August 20, 2013 at 12:00am — 3 Comments

VR Copter X4 the new Frame for your VRBrain 4.x or APM by VRI First Flight Video

Dear Friends

in this video I present the first flights made ​​with the new frame designed by Virtualrobotix.

The frame drawn using last generation 3D Cad , is made of carbon fiber and aluminum.

The frame is designed for users who want to have a frame strong, lightweight, reliable and easily customizable.

The version presented…

Continue

Added by Roberto Navoni on August 14, 2013 at 11:30pm — No Comments

Testing 3.0.4 code (built using Eclipse 06.aug 13) on my CTX4 quad

In the video I tested Loiter mode

Tested normal manual flight, alt hold, loiter and land - all Works fine

Alt hold and Loiter was impressive

In this test I used PPMSUM from my RX module



The…

Continue

Added by Oyvind Amundsen on August 7, 2013 at 11:34pm — 1 Comment

VR LAB present last drone developed in Virtualrobotix

 

Dear Friends,

this is the first images from VR Lab . In these pictures you can see our entry level frame VR CopterX4-8

The frame make using good materials as Carbon Fiber and Ergal .

The frame configuration was an idea of Flavio Taborelli , that inside Virtualrobotix.IT  is the CTO of  mechanical department. This frame doing 2000 hours of…

Continue

Added by Roberto Navoni on August 2, 2013 at 6:30pm — 1 Comment

Monthly Archives

2019

2017

2016

2015

2014

2013

2012

2011

2010

1999

Events

© 2019   Created by Roberto Navoni.   Powered by

Badges  |  Report an Issue  |  Terms of Service